# Project properties audit selection

**URL:** <https://forum.inductiveautomation.com/t/project-properties-audit-selection/1503>\
**Category:** Ignition\
**Created:** [February 6, 2010, 7:01pm UTC](https://forum.inductiveautomation.com/t/project-properties-audit-selection/1503 "2010-02-06T19:01:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![david\_mccutchen](https://avatars.discourse-cdn.com/v4/letter/d/919ad9/32.png) [@david\_mccutchen](https://forum.inductiveautomation.com/u/david_mccutchen)\
**Post date:** [February 6, 2010, 7:01pm UTC](https://forum.inductiveautomation.com/t/project-properties-audit-selection/1503/1 "2010-02-06T19:01:12Z")

</div>

In the configuration folder, properties/general/auditing settings, the default setting has my authentication profile selected. When I click the box it will allow me to select my audit profile, but it will not save. Gives a gateway 500 fault. ??

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [April 9, 2010, 12:09am UTC](https://forum.inductiveautomation.com/t/project-properties-audit-selection/1503/2 "2010-04-09T00:09:16Z")

</div>

This problem has been fixed since your version. Please download the latest version, 7.0.8, at [http://www.inductiveautomation.com/downloads](http://www.inductiveautomation.com/downloads).