# Project Templates

**URL:** <https://forum.inductiveautomation.com/t/project-templates/26228>\
**Category:** Ignition\
**Created:** [July 2, 2019, 2:59pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228 "2019-07-02T14:59:14Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![B\_Graham](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@B\_Graham](https://forum.inductiveautomation.com/u/B_Graham)\
**Post date:** [July 2, 2019, 2:59pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/1 "2019-07-02T14:59:14Z")

</div>

Ignition 8.2

I have tried Ignition 8.0 and 8.2. I am not able to select a project template for any thing on either version.

---

<div class="post-metadata">

**Author:** ![jlivingston](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jlivingston](https://forum.inductiveautomation.com/u/jlivingston)\
**Post date:** [July 3, 2019, 2:54pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/2 "2019-07-03T14:54:01Z")

</div>

Just a guess- I do not know what your experience is like, and hope that you find this link to be of help. Your post did not say anything about this default ( if you look at the link video , you will know which defaut- at around 43 seconds in ).  
[https://www.inductiveuniversity.com/videos/about-communication-modes/8.0](https://www.inductiveuniversity.com/videos/about-communication-modes/8.0)

---

<div class="post-metadata">

**Author:** ![B\_Graham](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@B\_Graham](https://forum.inductiveautomation.com/u/B_Graham)\
**Post date:** [July 3, 2019, 3:12pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/3 "2019-07-03T15:12:35Z")

</div>

Sorry, I should have clarified better. When creating a new project, the drop down for project templates does not display anything. I have two different machines. One updated to 8.0 and one to 8.0.2. Both share the same issue.

---

<div class="post-metadata">

**Author:** ![jlivingston](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jlivingston](https://forum.inductiveautomation.com/u/jlivingston)\
**Post date:** [July 3, 2019, 6:47pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/4 "2019-07-03T18:47:02Z")

</div>

That would look like a program problem to me, unless:Project Name not given or changed; UserSource blank (not sure if blank would cause that); Preview Mode is incorrect (which I would doubt- was Green Arrow on second line of Designer or Project Menu choice ) or Perspective Module alternate Vision Module not installed ( eval copy? ). I will see if I can attach a link file from the manual and expect that support might notice my message or just the accumulation (count) of messages here. [CreatingNameandUSERsourcerequiredQ](https://docs/inductiveautomation.com/display/DOC80/Designer)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [July 3, 2019, 7:12pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/5 "2019-07-03T19:12:25Z")

</div>

This forum is not an official source of support. For anything important, contact IA’s actual [support](https://support.inductiveautomation.com/).

---

<div class="post-metadata">

**Author:** ![jlivingston](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@jlivingston](https://forum.inductiveautomation.com/u/jlivingston)\
**Post date:** [July 3, 2019, 8:15pm UTC](https://forum.inductiveautomation.com/t/project-templates/26228/6 "2019-07-03T20:15:04Z")

</div>

Duly Noted-  
"Https : / / support . inductiveautomation . com "( without spaces or quotes , as in link below )  
[Link to Support Click Here or Above](https://support.inductiveautomation.com)  
Thanks