# Project View Property on upgrade **URL:** \ **Category:** Ignition\ **Created:** [October 20, 2014, 7:54pm UTC](https://forum.inductiveautomation.com/t/project-view-property-on-upgrade/9196 "2014-10-20T19:54:04Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Pat](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@Pat](https://forum.inductiveautomation.com/u/Pat)\ **Post date:** [October 20, 2014, 7:54pm UTC](https://forum.inductiveautomation.com/t/project-view-property-on-upgrade/9196/1 "2014-10-20T19:54:04Z")
I had set the Project View property to require certain roles under 7.6, after upgrading to 7.7.1 those required roles didn’t carry over. It’s easy to fix, but I was unaware of this. ---
**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\ **Post date:** [October 20, 2014, 8:43pm UTC](https://forum.inductiveautomation.com/t/project-view-property-on-upgrade/9196/2 "2014-10-20T20:43:03Z")
I wasn’t able to replicate this going from 7.6.6 to 7.7.1. Do you have any other details that might help us replicate the issue? (Upgrade via installer vs zip file, OS, any errors in logs, any glitches during install, etc) ---
**Author:** ![Pat](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@Pat](https://forum.inductiveautomation.com/u/Pat)\ **Post date:** [October 21, 2014, 5:04pm UTC](https://forum.inductiveautomation.com/t/project-view-property-on-upgrade/9196/3 "2014-10-21T17:04:01Z")
I upgraded from 7.6.6 to 7.7.1, although it might have happened when I upgraded to 7.6.6 and I never noticed. If you are unable to replicate the problem then I’ll assume that it happened before upgrading to 7.7.1 and I just didn’t notice.