# Pulse function in ignition **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [December 9, 2025, 8:35am UTC](https://forum.inductiveautomation.com/t/pulse-function-in-ignition/112693 "2025-12-09T08:35:23Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\ **Post date:** [December 9, 2025, 8:55am UTC](https://forum.inductiveautomation.com/t/pulse-function-in-ignition/112693/2 "2025-12-09T08:55:38Z")
> [@Perspective: Scripting a Momentary Button](https://forum.inductiveautomation.com/t/perspective-scripting-a-momentary-button/35684): > > Hey folks, Ignition 8.0.7 I’m trying to implement a momentary button in Perspective, but the feature doesn’t appear to be available. The One-Shot Button documentation states, [“If your PLC expects the HMI to reset the bit, use the Momentary Button.”](https://docs.inductiveautomation.com/display/DOC80/Perspective+-+One-Shot+Button) Since it seems as though the feature is not yet supported, does anyone have an example script for the button component that can reliably perform the Momentary function? I’m having a hard time replicating the function of the momentary button from Vi… This is a typical momentary button. This is also a bad idea. This leaves the system open to the button getting latched on and never reset. This is also a problem with Citect. I recommend you modify the PLC logic slightly to make the PLC reset the bit after a latch from the SCADA, its much better and less error prone. --- _[View the full topic](https://forum.inductiveautomation.com/t/pulse-function-in-ignition/112693)._