# Quick Client Slow for Micrologix

**URL:** <https://forum.inductiveautomation.com/t/quick-client-slow-for-micrologix/10761>\
**Category:** Ignition\
**Created:** [November 9, 2015, 4:50pm UTC](https://forum.inductiveautomation.com/t/quick-client-slow-for-micrologix/10761 "2015-11-09T16:50:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tranh2](https://avatars.discourse-cdn.com/v4/letter/t/ea666f/32.png) [@tranh2](https://forum.inductiveautomation.com/u/tranh2)\
**Post date:** [November 9, 2015, 4:50pm UTC](https://forum.inductiveautomation.com/t/quick-client-slow-for-micrologix/10761/1 "2015-11-09T16:50:50Z")

</div>

Hello,

I recently setup a dedicated OPC-Server and I have a device that is pointing to a Micrologix 1100. Everything looks like its connected succesfully and I have no error coming in. I’m trying to use the quick client to view the values and I can browse down to the datatable levels but it seems I can’t browse beyond that. For example I have a data table N11. I can’t seem to open that tree…or if I can open it it takes a long time before it opens or doesn’t at all.

Any ideas?