# Raspberry PI SQLBridge

**URL:** <https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848>\
**Category:** General Discussion\
**Created:** [December 1, 2015, 5:37pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848 "2015-12-01T17:37:56Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![laiassa](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@laiassa](https://forum.inductiveautomation.com/u/laiassa)\
**Post date:** [December 1, 2015, 5:37pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/1 "2015-12-01T17:37:56Z")

</div>

Hello folks, Have anyone tried a SQLBridge module on this platform?

Best Regards

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [December 1, 2015, 5:48pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/2 "2015-12-01T17:48:13Z")

</div>

While this can probably be made to work experimentally, neither the service wrapper component nor the licensing works on ARM platforms right now.

---

<div class="post-metadata">

**Author:** ![cmisztur2](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmisztur2/32/4243_2.png) [@cmisztur2](https://forum.inductiveautomation.com/u/cmisztur2)\
**Post date:** [December 13, 2015, 9:03pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/3 "2015-12-13T21:03:56Z")

</div>

Like to get data off a Pi?

---

<div class="post-metadata">

**Author:** ![laiassa](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@laiassa](https://forum.inductiveautomation.com/u/laiassa)\
**Post date:** [January 9, 2017, 8:52pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/4 "2017-01-09T20:52:30Z")

</div>

Hello folks,  
Again trying to work on this project. I am trying to build a low power consumption sql bridge to add a store and forward device to an existing installation.  
Do you know if somebody has worked with RAspberry, or Intel Joule or lattepanda platforms??

Best Regards

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [January 24, 2017, 7:09pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/5 "2017-01-24T19:09:32Z")

</div>

Hi,

As of 7.9, we now publish an Arm version of Ignition directly on the [downloads page](https://inductiveautomation.com/downloads/ignition). Since the PI comes with java pre-installed (on the raspbian distro, at least), getting started is really as easy as extracting that package, making “ignition.sh” executable, and running “ignition.sh start”.

I can’t comment on what people have done in production, but if the load isn’t _too_ great (say, \<20 groups, \< few thousand tags), it should work just fine.

Regards,

---

<div class="post-metadata">

**Author:** ![laiassa](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@laiassa](https://forum.inductiveautomation.com/u/laiassa)\
**Post date:** [January 25, 2017, 6:38pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/6 "2017-01-25T18:38:58Z")

</div>

Hi, I have my PI model 3 with the ARm package running on it.  
It is a bit slow when I run the gateway configuration menu. I wonder if just installing the sqlbridge module could benefit the performance.

Best regards

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [January 26, 2017, 6:45pm UTC](https://forum.inductiveautomation.com/t/raspberry-pi-sqlbridge/10848/7 "2017-01-26T18:45:56Z")

</div>

Hi,

The web-ui is one thing, and could perhaps be a bit heavy, but should only affect the PI when you’re actively viewing the gateway page.

Executing the transaction groups is a different issue, and should work to some degree. So, my point is, try setting up a test of some groups logging, and view the memory/cpu, without the gateway page open.

Regards,