# Recipies

**URL:** <https://forum.inductiveautomation.com/t/recipies/3855>\
**Category:** Ignition\
**Created:** [January 13, 2012, 12:11pm UTC](https://forum.inductiveautomation.com/t/recipies/3855 "2012-01-13T12:11:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kevinmarchand](https://avatars.discourse-cdn.com/v4/letter/k/439d5e/32.png) [@kevinmarchand](https://forum.inductiveautomation.com/u/kevinmarchand)\
**Post date:** [January 13, 2012, 12:11pm UTC](https://forum.inductiveautomation.com/t/recipies/3855/1 "2012-01-13T12:11:47Z")

</div>

Hi,  
Do you have an example of downloading a set of parameters from ignition to a PLC.  
Like the recipies management in AB panelview.

thanks

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [January 13, 2012, 4:09pm UTC](https://forum.inductiveautomation.com/t/recipies/3855/2 "2012-01-13T16:09:09Z")

</div>

Ask and you shall receive.

[RecipeMangement.pdf](https://us1.discourse-cdn.com/inductiveautomation/original/1X/1ca7c888ac34d5d8c15c6cbf1afece6497ddc2a5.pdf) (277 KB)

---

<div class="post-metadata">

**Author:** ![william.maclane](https://avatars.discourse-cdn.com/v4/letter/w/e9a140/32.png) [@william.maclane](https://forum.inductiveautomation.com/u/william.maclane)\
**Post date:** [September 1, 2017, 1:27pm UTC](https://forum.inductiveautomation.com/t/recipies/3855/3 "2017-09-01T13:27:29Z")

</div>

I thought I read about this somewhere on the IA site, but I have not found it. This seems like a good idea and I have a use for similar, The PDF link goes off into cyberland and does not display anything.