# Red Lion Data Converter DA30D outputs not switching

**URL:** <https://forum.inductiveautomation.com/t/red-lion-data-converter-da30d-outputs-not-switching/93073>\
**Category:** Ignition\
**Created:** [July 11, 2024, 11:53am UTC](https://forum.inductiveautomation.com/t/red-lion-data-converter-da30d-outputs-not-switching/93073 "2024-07-11T11:53:44Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![michael.flagler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/michael.flagler/32/26272_2.png) [@michael.flagler](https://forum.inductiveautomation.com/u/michael.flagler)\
**Post date:** [July 11, 2024, 6:01pm UTC](https://forum.inductiveautomation.com/t/red-lion-data-converter-da30d-outputs-not-switching/93073/9 "2024-07-11T18:01:13Z")

</div>

I would check the configuration in the RedLion. We typically use them to pass tags directly between devices, but we also typically set them up for one-way communications. It's possible it's rejecting writes to those tags because it simply can't write back depending on the config.

---

_[View the full topic](https://forum.inductiveautomation.com/t/red-lion-data-converter-da30d-outputs-not-switching/93073)._