# Redundancy gateway

**URL:** <https://forum.inductiveautomation.com/t/redundancy-gateway/72272>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [April 10, 2023, 7:21pm UTC](https://forum.inductiveautomation.com/t/redundancy-gateway/72272 "2023-04-10T19:21:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ricardo\_javier\_reyes](https://avatars.discourse-cdn.com/v4/letter/r/e9bcb4/32.png) [@Ricardo\_javier\_reyes](https://forum.inductiveautomation.com/u/Ricardo_javier_reyes)\
**Post date:** [April 10, 2023, 7:21pm UTC](https://forum.inductiveautomation.com/t/redundancy-gateway/72272/1 "2023-04-10T19:21:34Z")

</div>

I have a Gateway as redundant in version 8.0, but I have several problems.  
I am using two plc's, to generate data, but when it is time to throw the master, the backup takes effect, but it stays in a loop where a pop-up screen appears and from there it does not happen and if it goes past that screen my tags do not load .  
But when it comes to restarting the application it catches perfectly.  
Has anyone had this problem and any advice they can give me with the problem?

 ![ignition](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/6/26b3cf8e6fdcc9a20ec9fe387800c93e915a2e4b.jpeg)