# Redundancy Sync Status Read

**URL:** <https://forum.inductiveautomation.com/t/redundancy-sync-status-read/71963>\
**Category:** Ignition\
**Created:** [April 3, 2023, 11:53am UTC](https://forum.inductiveautomation.com/t/redundancy-sync-status-read/71963 "2023-04-03T11:53:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![melwadeya](https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/32.png) [@melwadeya](https://forum.inductiveautomation.com/u/melwadeya)\
**Post date:** [April 3, 2023, 11:53am UTC](https://forum.inductiveautomation.com/t/redundancy-sync-status-read/71963/1 "2023-04-03T11:53:16Z")

</div>

Hi, is there a way to read the sync status in designer? This is to add it to a diagnostic page that we have for our site.

The system redundancy tag folder does not have it.

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/a/7/a741dda929702d8640d087ed75676d60fc5cbd2b.png)

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/0/20b0572ed106030f5a26fbfd730f205560d8802c.png)