# Remote Audit over Gateway Network

**URL:** <https://forum.inductiveautomation.com/t/remote-audit-over-gateway-network/44328>\
**Category:** Ignition\
**Created:** [March 10, 2021, 7:58pm UTC](https://forum.inductiveautomation.com/t/remote-audit-over-gateway-network/44328 "2021-03-10T19:58:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tim.schultz](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tim.schultz](https://forum.inductiveautomation.com/u/tim.schultz)\
**Post date:** [March 10, 2021, 7:58pm UTC](https://forum.inductiveautomation.com/t/remote-audit-over-gateway-network/44328/1 "2021-03-10T19:58:25Z")

</div>

I have two gateways, both running 8.1.2. They are successfully connected via gateway network. I set up the centralized server (the incoming connection side of gateway network) with an ‘internal’ audit profile, and the other gateway with a ‘remote’ audit profile; I was able to browse for the name of the remote provider successfully. Now that I have it enabled, I see this message in the logs of the remote server:  
“Cannot send audit event to remote server - remote server does not allow storage”

I don’t see any settings on my centralized server about setting up/enabling/restricting storage… Any thoughts on where to start looking?

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [March 10, 2021, 9:16pm UTC](https://forum.inductiveautomation.com/t/remote-audit-over-gateway-network/44328/2 "2021-03-10T21:16:23Z")

</div>

Check Configure → Security → Service Security. Each audit profile will have an entry on this list, or you can set a default for all providers:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/9/c/9cbc18b4c21042f60c107402fae6939d63d6caec.png)

---

<div class="post-metadata">

**Author:** ![tim.schultz](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tim.schultz](https://forum.inductiveautomation.com/u/tim.schultz)\
**Post date:** [March 11, 2021, 2:43pm UTC](https://forum.inductiveautomation.com/t/remote-audit-over-gateway-network/44328/3 "2021-03-11T14:43:02Z")

</div>

Thank you - I didn’t realize that was there. Working great now!