# Remote conecction?

**URL:** <https://forum.inductiveautomation.com/t/remote-conecction/3049>\
**Category:** Ignition\
**Created:** [June 29, 2011, 3:43pm UTC](https://forum.inductiveautomation.com/t/remote-conecction/3049 "2011-06-29T15:43:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![F\_Rayon](https://avatars.discourse-cdn.com/v4/letter/f/e68b1a/32.png) [@F\_Rayon](https://forum.inductiveautomation.com/u/F_Rayon)\
**Post date:** [June 29, 2011, 3:43pm UTC](https://forum.inductiveautomation.com/t/remote-conecction/3049/1 "2011-06-29T15:43:45Z")

</div>

Hello

I have a question.

I have two redundant servers where SCADA is running licensed each, and a workstation where I want to see the SCADA.

my question is,  
I can connect to the server from the workstation without having internet servers?.

Greetings.

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [June 29, 2011, 5:10pm UTC](https://forum.inductiveautomation.com/t/remote-conecction/3049/2 "2011-06-29T17:10:31Z")

</div>

Yes, you don’t have to have the internet to open clients or designers.

---

<div class="post-metadata">

**Author:** ![F\_Rayon](https://avatars.discourse-cdn.com/v4/letter/f/e68b1a/32.png) [@F\_Rayon](https://forum.inductiveautomation.com/u/F_Rayon)\
**Post date:** [June 29, 2011, 5:16pm UTC](https://forum.inductiveautomation.com/t/remote-conecction/3049/3 "2011-06-29T17:16:00Z")

</div>

OK.

Thanks, Travis.