# Remote tag provider update rate setting

**URL:** <https://forum.inductiveautomation.com/t/remote-tag-provider-update-rate-setting/17777>\
**Category:** Ignition\
**Created:** [April 19, 2018, 6:30pm UTC](https://forum.inductiveautomation.com/t/remote-tag-provider-update-rate-setting/17777 "2018-04-19T18:30:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JMicky](https://avatars.discourse-cdn.com/v4/letter/j/dfb087/32.png) [@JMicky](https://forum.inductiveautomation.com/u/JMicky)\
**Post date:** [April 19, 2018, 6:30pm UTC](https://forum.inductiveautomation.com/t/remote-tag-provider-update-rate-setting/17777/1 "2018-04-19T18:30:02Z")

</div>

Hi,

I have a hub and spoke configuration with the hub connecting to tags on the spokes using the gateway network remote tag providers. The status shows the bytes sent and received per second but I don’t see where to configure the update rate. Is there something like a scan class to configure the tag update rate over the remote tag provider? The communication is normally over a cable modem connection, but fails over to cellular if the cable goes down. We would like to lower the tag update rate to limit the data usage over cellular.

Ignition V7.9.4

Thank you for you help,

John

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [April 19, 2018, 7:05pm UTC](https://forum.inductiveautomation.com/t/remote-tag-provider-update-rate-setting/17777/2 "2018-04-19T19:05:20Z")

</div>

Hi John,

Take a look at the [Driven Scan Class](https://docs.inductiveautomation.com/display/DOC79/Driven+Scan+Class).