# Report editor: move backward/move forward missing

**URL:** <https://forum.inductiveautomation.com/t/report-editor-move-backward-move-forward-missing/4166>\
**Category:** Ignition\
**Created:** [March 19, 2012, 7:48am UTC](https://forum.inductiveautomation.com/t/report-editor-move-backward-move-forward-missing/4166 "2012-03-19T07:48:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cgz](https://avatars.discourse-cdn.com/v4/letter/c/8dc957/32.png) [@cgz](https://forum.inductiveautomation.com/u/cgz)\
**Post date:** [March 19, 2012, 7:48am UTC](https://forum.inductiveautomation.com/t/report-editor-move-backward-move-forward-missing/4166/1 "2012-03-19T07:48:48Z")

</div>

For adjusting the z-order of components, there’s no equivalents to  
Move backward / Move forward of the main designer.

I could only find “Move to back” and “Bring to front” equivalents.

Perhaps the report designer’s menu could use some added organizing  
and standardization (using same names as in the main designer, for example)  
as well.

Thanks!

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [March 19, 2012, 11:52pm UTC](https://forum.inductiveautomation.com/t/report-editor-move-backward-move-forward-missing/4166/2 "2012-03-19T23:52:41Z")

</div>

Ok, thanks for reporting that. I will add a ticket in.