# Report next page not working **URL:** \ **Category:** Ignition\ **Created:** [March 26, 2020, 9:06pm UTC](https://forum.inductiveautomation.com/t/report-next-page-not-working/33463 "2020-03-26T21:06:10Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![wpmccormick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/wpmccormick/32/13940_2.png) [@wpmccormick](https://forum.inductiveautomation.com/u/wpmccormick)\ **Post date:** [March 26, 2020, 9:06pm UTC](https://forum.inductiveautomation.com/t/report-next-page-not-working/33463/1 "2020-03-26T21:06:10Z")
I have a report (a single table on a single page with a single data source) that when previewed (in the designer or in a report viewer) does not make a new page when it should. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/9/98cb44a3d255eb98345c40be1c18bf9387584844.png) I have 2 other reports that are almost exactly the same, and working fine, except the problem report has 9 columns and the working reports have no more than 5. I tried increasing the page margin and it didn’t help. Is this some known issue? Or is this a common issue? Thanks! ---
**Author:** ![KathyApplebaum](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kathyapplebaum/32/7261_2.png) [@KathyApplebaum](https://forum.inductiveautomation.com/u/KathyApplebaum)\ **Post date:** [March 26, 2020, 9:43pm UTC](https://forum.inductiveautomation.com/t/report-next-page-not-working/33463/2 "2020-03-26T21:43:43Z")
Looks like you changed the table itself to two (or more) columns. (See this post: [Add columns to table](http://forum.inductiveautomation.com/t/add-columns-to-table/10728/2)) Change it back to one and it should flow to the next page properly. ---
**Author:** ![wpmccormick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/wpmccormick/32/13940_2.png) [@wpmccormick](https://forum.inductiveautomation.com/u/wpmccormick)\ **Post date:** [March 26, 2020, 9:46pm UTC](https://forum.inductiveautomation.com/t/report-next-page-not-working/33463/3 "2020-03-26T21:46:04Z")
Yep that was it!