# Report pagination

**URL:** <https://forum.inductiveautomation.com/t/report-pagination/3376>\
**Category:** Ignition\
**Created:** [September 30, 2011, 5:03pm UTC](https://forum.inductiveautomation.com/t/report-pagination/3376 "2011-09-30T17:03:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [September 30, 2011, 5:03pm UTC](https://forum.inductiveautomation.com/t/report-pagination/3376/1 "2011-09-30T17:03:41Z")

</div>

I have a table in a report, and saw this handy-dandy little checkbox. At the moment, I’m not seeing a difference in the pagination between these two modes. I’m for the moment assuming that:

This is standard pagination. What doesn’t fit on the page goes onnt the next.  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/1X/2f2dd18f867d3e208c6bd2fc8c7885a7cbf5726b.png)  
  
Inserts a page break between new headers.  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/1X/7e4db48444004f999b266db60f6bead474d46909.png)

Is there more (i.e. better) documentation than what’s in the user guide?

---

<div class="post-metadata">

**Author:** ![nathan](https://avatars.discourse-cdn.com/v4/letter/n/c5a1d2/32.png) [@nathan](https://forum.inductiveautomation.com/u/nathan)\
**Post date:** [September 30, 2011, 6:59pm UTC](https://forum.inductiveautomation.com/t/report-pagination/3376/2 "2011-09-30T18:59:37Z")

</div>

This is the best I have, taken from the [documentation](http://www.reportmill.com/support/tables.pdf) of the reporting application, which we support as our own. I don’t think it answers your question, but going through that may help with reporting interface.

[quote]Paginate Switch: This is a three state switch (on, off, N/A) that you will  
rarely need to change. By default, tables paginate if the call to  
generateReport() specifies it (the default is yes). However, this is the key  
to how ReportMill automatically does the right thing depending on  
whether you are generating a paginated report (for PDF output) or a  
scrollable report (for Flash or CSV). On rare occasions, you might want  
to configure this switch to always get a scrollable report or a paginated  
report, regardless of the output file format.[/quote]

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [October 3, 2011, 3:23pm UTC](https://forum.inductiveautomation.com/t/report-pagination/3376/3 "2011-10-03T15:23:17Z")

</div>

You’re absolutely right, it didn’t answer it! 😆

Thanks for the link, though. I’ll start wading through ReportMill’s docs.