# Report printing resolution

**URL:** <https://forum.inductiveautomation.com/t/report-printing-resolution/19125>\
**Category:** General Discussion\
**Created:** [August 7, 2018, 3:29pm UTC](https://forum.inductiveautomation.com/t/report-printing-resolution/19125 "2018-08-07T15:29:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [August 7, 2018, 9:14pm UTC](https://forum.inductiveautomation.com/t/report-printing-resolution/19125/2 "2018-08-07T21:14:06Z")

</div>

Hi Tim, welcome to the forum! 🙂

I have personally found it more effective to generate and send the ZPL code directly than using a printer driver.

This thread starting about here may help.

> [@Send ZPL command to Zebra 170PAX4 via TCP/IP Socket](http://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003/10):
>
> Please note that there is a much simpler way to communicate with Zebra nowadays using HTTP. [https://km.zebra.com/kb/index?page=content&id=WH133&actp=LIST](https://km.zebra.com/kb/index?page=content&id=WH133&actp=LIST)

---

_[View the full topic](https://forum.inductiveautomation.com/t/report-printing-resolution/19125)._