# Report - Table doesn't roll over onto new page

**URL:** <https://forum.inductiveautomation.com/t/report-table-doesnt-roll-over-onto-new-page/30973>\
**Category:** Ignition\
**Created:** [December 30, 2019, 3:21pm UTC](https://forum.inductiveautomation.com/t/report-table-doesnt-roll-over-onto-new-page/30973 "2019-12-30T15:21:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![grietveld](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/grietveld/32/6984_2.png) [@grietveld](https://forum.inductiveautomation.com/u/grietveld)\
**Post date:** [December 30, 2019, 3:21pm UTC](https://forum.inductiveautomation.com/t/report-table-doesnt-roll-over-onto-new-page/30973/1 "2019-12-30T15:21:03Z")

</div>

I’ve been battling a report a bit the past few days, and finally decided to call in some reinforcements.

The first page of my report the table rolls over on another page just fine, but if the table on another page has too much data, it does what is shown in the screenshot below. I’ve tried comparing the two pages and tables, and they appear to be identical other than the data they contain.

Any ideas on what to check?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/2X/6/67f5145e1c23122f2e3cc7fe25cca95dd6d910fa.png)

---

<div class="post-metadata">

**Author:** ![jpark](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jpark](https://forum.inductiveautomation.com/u/jpark)\
**Post date:** [December 30, 2019, 4:17pm UTC](https://forum.inductiveautomation.com/t/report-table-doesnt-roll-over-onto-new-page/30973/2 "2019-12-30T16:17:36Z")

</div>

Check the table column count. It has been renamed to table repeat count on newer versions.