# Report table format **URL:** \ **Category:** Ignition\ **Created:** [November 28, 2018, 2:04pm UTC](https://forum.inductiveautomation.com/t/report-table-format/21109 "2018-11-28T14:04:30Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![danny.boyd](https://avatars.discourse-cdn.com/v4/letter/d/9e8a1a/32.png) [@danny.boyd](https://forum.inductiveautomation.com/u/danny.boyd)\ **Post date:** [November 28, 2018, 2:04pm UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/1 "2018-11-28T14:04:30Z")
I have a report with a table group containing two tables requiring more than one page. If the last page of the report is less than a full page it displays at the bottom of the page. How can I get it to display at the top of the page? ---
**Author:** ![cbanzet](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cbanzet/32/6207_2.png) [@cbanzet](https://forum.inductiveautomation.com/u/cbanzet)\ **Post date:** [December 23, 2019, 12:22am UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/2 "2019-12-23T00:22:56Z")
Weird that this has received no replies. I have the same issue. I am in Dec. 2019 and using v7.9. I’m guessing that this must be so obvious that no one has deigned to reply. I have to confess, I find many of things about the reporting module to be considerably less than intuitive. ---
**Author:** ![cbanzet](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cbanzet/32/6207_2.png) [@cbanzet](https://forum.inductiveautomation.com/u/cbanzet)\ **Post date:** [December 23, 2019, 12:35am UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/3 "2019-12-23T00:35:42Z")
Ha! I found it! In my case I have a grouping and two sub groupings. That produces 3 “Details” sections in my report. When I select the “Details” section (un-expanded) and then look down in the Property Inspector, there is a property that says “Move to Bottom” with a checkbox. One of my subgroups had this checked and apparently it forced the whole table to the bottom of last page. ---
**Author:** ![danny.boyd](https://avatars.discourse-cdn.com/v4/letter/d/9e8a1a/32.png) [@danny.boyd](https://forum.inductiveautomation.com/u/danny.boyd)\ **Post date:** [December 23, 2019, 1:31pm UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/4 "2019-12-23T13:31:19Z")
That’s a long time to get a reply. I had forgotten about the issue. (Just living with it). But, I looked at the report and found the same thing you did. That was buried pretty well ! ---
**Author:** ![Anderson\_Suarez](https://avatars.discourse-cdn.com/v4/letter/a/71e660/32.png) [@Anderson\_Suarez](https://forum.inductiveautomation.com/u/Anderson_Suarez)\ **Post date:** [June 12, 2025, 9:33pm UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/5 "2025-06-12T21:33:53Z")
This was helpful even all these years later. Thank you ---
**Author:** ![cbanzet](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cbanzet/32/6207_2.png) [@cbanzet](https://forum.inductiveautomation.com/u/cbanzet)\ **Post date:** [June 12, 2025, 10:44pm UTC](https://forum.inductiveautomation.com/t/report-table-format/21109/6 "2025-06-12T22:44:16Z")
Very cool.