# Reporting module - Page navigation not working

**URL:** <https://forum.inductiveautomation.com/t/reporting-module-page-navigation-not-working/1866>\
**Category:** Ignition\
**Created:** [May 25, 2010, 10:02pm UTC](https://forum.inductiveautomation.com/t/reporting-module-page-navigation-not-working/1866 "2010-05-25T22:02:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ISDProj](https://avatars.discourse-cdn.com/v4/letter/i/58956e/32.png) [@ISDProj](https://forum.inductiveautomation.com/u/ISDProj)\
**Post date:** [May 25, 2010, 10:02pm UTC](https://forum.inductiveautomation.com/t/reporting-module-page-navigation-not-working/1866/1 "2010-05-25T22:02:33Z")

</div>

If you use the report previewer in Ignition to view a report that is more than one page in length the navigation buttons at the bottom of the viewer do not work. You can still “scroll” through the pages using the scroll bar.  
Also any chance of looking at my other post [http://www.inductiveautomation.com/forum/viewtopic.php?f=70&t=5243](http://www.inductiveautomation.com/forum/viewtopic.php?f=70&t=5243)  
these two are causing some grief to us.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [June 3, 2010, 11:15pm UTC](https://forum.inductiveautomation.com/t/reporting-module-page-navigation-not-working/1866/2 "2010-06-03T23:15:37Z")

</div>

The buttons at the bottom work for me, I’m not sure I understand… it sounds like it is just one tall page?

---

<div class="post-metadata">

**Author:** ![ISDProj](https://avatars.discourse-cdn.com/v4/letter/i/58956e/32.png) [@ISDProj](https://forum.inductiveautomation.com/u/ISDProj)\
**Post date:** [June 4, 2010, 4:34am UTC](https://forum.inductiveautomation.com/t/reporting-module-page-navigation-not-working/1866/3 "2010-06-04T04:34:02Z")

</div>

Carl,  
It is a “multiple page” report when you have more than one work centre selected.  
I have already sent a copy of the report window to your support link in response to topic 5243, I have uploaded a copy of the same report (with multiple work centres) so you can see the button problem first hand. (Called “ReportDowntimeHyneMultiPage.vwin”)