# Resetting the AB driver **URL:** \ **Category:** General Discussion\ **Created:** [December 11, 2012, 2:59pm UTC](https://forum.inductiveautomation.com/t/resetting-the-ab-driver/5559 "2012-12-11T14:59:52Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\ **Post date:** [December 11, 2012, 2:59pm UTC](https://forum.inductiveautomation.com/t/resetting-the-ab-driver/5559/1 "2012-12-11T14:59:52Z")
Every few weeks we will encounter a folder of tags that will go bad. The only way that I have found to solve the problem is to reset the Allen Bradley driver that we are using. Are you guys aware of this problem, or have a fix for it? ---
**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\ **Post date:** [December 11, 2012, 3:58pm UTC](https://forum.inductiveautomation.com/t/resetting-the-ab-driver/5559/2 "2012-12-11T15:58:47Z")
What device types is it happening with? (ControlLogix, CompactLogix, MicroLogix, SLC or PLC-5) What version of Ignition are you using? ---
**Author:** ![mikehill100](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mikehill100](https://forum.inductiveautomation.com/u/mikehill100)\ **Post date:** [December 11, 2012, 4:06pm UTC](https://forum.inductiveautomation.com/t/resetting-the-ab-driver/5559/3 "2012-12-11T16:06:03Z")
SLC Version 7.5.2 ---
**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\ **Post date:** [December 11, 2012, 4:18pm UTC](https://forum.inductiveautomation.com/t/resetting-the-ab-driver/5559/4 "2012-12-11T16:18:20Z")
Are you connecting directly to a SLC5/05, through DH+ or ControlNet via a gateway, or through a device like a NET-ENI?