# Responding to when an operator forgot to stop production

**URL:** <https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783>\
**Category:** Ignition\
**Created:** [January 4, 2014, 4:32pm UTC](https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783 "2014-01-04T16:32:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![David.Reed.Schmidt](https://avatars.discourse-cdn.com/v4/letter/d/5f9b8f/32.png) [@David.Reed.Schmidt](https://forum.inductiveautomation.com/u/David.Reed.Schmidt)\
**Post date:** [January 4, 2014, 4:32pm UTC](https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783/1 "2014-01-04T16:32:46Z")

</div>

We recently started tracking OEE with Ignition. Yesterday, the shift lead never ended the production run after the run ended around 3am. At 7am I noticed that the production run was still in progress with about 4 hours of downtime and an OEE for the production run at 45%.

How do I revise the OEE to reflect a different end time for a production run. In this case the end time was 3am instead of 7am?

---

<div class="post-metadata">

**Author:** ![drewdin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/drewdin/32/3363_2.png) [@drewdin](https://forum.inductiveautomation.com/u/drewdin)\
**Post date:** [January 5, 2014, 2:19am UTC](https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783/2 "2014-01-05T02:19:43Z")

</div>

are you using the OEE module?

---

<div class="post-metadata">

**Author:** ![David.Reed.Schmidt](https://avatars.discourse-cdn.com/v4/letter/d/5f9b8f/32.png) [@David.Reed.Schmidt](https://forum.inductiveautomation.com/u/David.Reed.Schmidt)\
**Post date:** [January 5, 2014, 3:17am UTC](https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783/3 "2014-01-05T03:17:32Z")

</div>

We are currently using the OEE module.

---

<div class="post-metadata">

**Author:** ![Pete.Low](https://avatars.discourse-cdn.com/v4/letter/p/f05b48/32.png) [@Pete.Low](https://forum.inductiveautomation.com/u/Pete.Low)\
**Post date:** [March 20, 2014, 10:07pm UTC](https://forum.inductiveautomation.com/t/responding-to-when-an-operator-forgot-to-stop-production/7783/4 "2014-03-20T22:07:04Z")

</div>

Hi David,  
You can edit that downtime event and change the reason to a planned downtime event. That way it wont affect your OEE.  
The end time of a run cannot be changed. You can note it in the note for the downtime event.