# Restrict Client Login By Schedule

**URL:** <https://forum.inductiveautomation.com/t/restrict-client-login-by-schedule/20229>\
**Category:** Ignition\
**Created:** [October 17, 2018, 2:03pm UTC](https://forum.inductiveautomation.com/t/restrict-client-login-by-schedule/20229 "2018-10-17T14:03:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [October 17, 2018, 2:03pm UTC](https://forum.inductiveautomation.com/t/restrict-client-login-by-schedule/20229/1 "2018-10-17T14:03:07Z")

</div>

I’m not seeing where to restrict the user login by their schedule setting as shown in the user manual.  
`To enable this, select the Schedule Restricted option on the user source in question.`

---

<div class="post-metadata">

**Author:** ![schenk](https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/32.png) [@schenk](https://forum.inductiveautomation.com/u/schenk)\
**Post date:** [October 17, 2018, 2:17pm UTC](https://forum.inductiveautomation.com/t/restrict-client-login-by-schedule/20229/2 "2018-10-17T14:17:25Z")

</div>

From the Gateway Webpage, go to Configure =\> Security =\> Users, Roles then Edit the User Source you want to set the restriction on. From there, you can check the Schedule Restricted box (Third item under Main).

---

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [October 17, 2018, 2:22pm UTC](https://forum.inductiveautomation.com/t/restrict-client-login-by-schedule/20229/3 "2018-10-17T14:22:09Z")

</div>

I was looking after going into manage users, and doing it by each individual user. I see now that I was one layer too deep. Thanks