# Roll-Up Hourly Downtime?

**URL:** <https://forum.inductiveautomation.com/t/roll-up-hourly-downtime/8583>\
**Category:** Ignition\
**Created:** [June 17, 2014, 9:55pm UTC](https://forum.inductiveautomation.com/t/roll-up-hourly-downtime/8583 "2014-06-17T21:55:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![LuMar](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@LuMar](https://forum.inductiveautomation.com/u/LuMar)\
**Post date:** [June 17, 2014, 9:55pm UTC](https://forum.inductiveautomation.com/t/roll-up-hourly-downtime/8583/1 "2014-06-17T21:55:13Z")

</div>

Is there anyway to roll-up a group of hourly events in a DownTime Table? How about making changes/editing the reason for multiple entries?

When a run is not properly stopped at the end of a shift a fault is triggered.  
What happens next is that the downtime table logs that same fault every hour creating multiple 1-hour entries instead of the desired 8-Hour downtime entry, resulting in some downtime re-classification for whomever has to start that station the following day.

This is particularly bad when starting the week as we could be facing potentially dozens of 1 hour long events generated over the weekend that will need to be reclassified.

I’m looking at the manual/ignition and it seems that roll-up is more intended to prevent multiple entries flooding the table within a set amount of time, but more of a span of seconds than hours.