# Rounded corners of a rectangle

**URL:** <https://forum.inductiveautomation.com/t/rounded-corners-of-a-rectangle/20393>\
**Category:** Ignition\
**Created:** [October 26, 2018, 8:24am UTC](https://forum.inductiveautomation.com/t/rounded-corners-of-a-rectangle/20393 "2018-10-26T08:24:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jorisherry](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@jorisherry](https://forum.inductiveautomation.com/u/jorisherry)\
**Post date:** [October 26, 2018, 8:24am UTC](https://forum.inductiveautomation.com/t/rounded-corners-of-a-rectangle/20393/1 "2018-10-26T08:24:50Z")

</div>

Can i set rounded corners on a rectangle in ignition 7.9.9? I don’t see the little drag circles.  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/6/6373cc8a7809fd55cc9bf14a9f310121a20193de.png)

---

<div class="post-metadata">

**Author:** ![AlThePal](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/althepal/32/3603_2.png) [@AlThePal](https://forum.inductiveautomation.com/u/AlThePal)\
**Post date:** [October 26, 2018, 8:50am UTC](https://forum.inductiveautomation.com/t/rounded-corners-of-a-rectangle/20393/2 "2018-10-26T08:50:43Z")

</div>

Works here. If you’ve selected another drawing tool or the regular cursor, make sure you select the rectangle then click on the rectangle drawing tool again to get the drawing controls back.

---

<div class="post-metadata">

**Author:** ![jorisherry](https://avatars.discourse-cdn.com/v4/letter/j/e19b73/32.png) [@jorisherry](https://forum.inductiveautomation.com/u/jorisherry)\
**Post date:** [October 26, 2018, 9:16am UTC](https://forum.inductiveautomation.com/t/rounded-corners-of-a-rectangle/20393/3 "2018-10-26T09:16:32Z")

</div>

Yes reslecting the rectangle tool did the trick, thx