# RPi designer question

**URL:** <https://forum.inductiveautomation.com/t/rpi-designer-question/36907>\
**Category:** Maker\
**Created:** [July 21, 2020, 4:38pm UTC](https://forum.inductiveautomation.com/t/rpi-designer-question/36907 "2020-07-21T16:38:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![a.sliver](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@a.sliver](https://forum.inductiveautomation.com/u/a.sliver)\
**Post date:** [July 21, 2020, 4:38pm UTC](https://forum.inductiveautomation.com/t/rpi-designer-question/36907/1 "2020-07-21T16:38:12Z")

</div>

So I have Maker on my pi but I can’t launch designer. It give me this error `64-bit OS not detected. This launcher must run on a 64-bit OS.` I tried to do some looking but didn’t find much that helped.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 21, 2020, 4:41pm UTC](https://forum.inductiveautomation.com/t/rpi-designer-question/36907/2 "2020-07-21T16:41:54Z")

</div>

You can install the Ignition Gateway on a RPi but you’ll need to run the Designer from a different machine. It won’t run on the RPi itself.

---

<div class="post-metadata">

**Author:** ![a.sliver](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@a.sliver](https://forum.inductiveautomation.com/u/a.sliver)\
**Post date:** [July 21, 2020, 5:08pm UTC](https://forum.inductiveautomation.com/t/rpi-designer-question/36907/3 "2020-07-21T17:08:37Z")

</div>

Well that sucks. Thank you for the information tho.