# Runinng the staging version

**URL:** <https://forum.inductiveautomation.com/t/runinng-the-staging-version/10076>\
**Category:** General Discussion\
**Created:** [June 1, 2015, 2:10pm UTC](https://forum.inductiveautomation.com/t/runinng-the-staging-version/10076 "2015-06-01T14:10:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CJVR](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@CJVR](https://forum.inductiveautomation.com/u/CJVR)\
**Post date:** [June 1, 2015, 2:10pm UTC](https://forum.inductiveautomation.com/t/runinng-the-staging-version/10076/1 "2015-06-01T14:10:58Z")

</div>

I know pressing F9 from the designer will run the staging version of the project. Is there a way to run the staging version on a machine that is not running the designer?

---

<div class="post-metadata">

**Author:** ![diat150](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@diat150](https://forum.inductiveautomation.com/u/diat150)\
**Post date:** [June 1, 2015, 2:38pm UTC](https://forum.inductiveautomation.com/t/runinng-the-staging-version/10076/2 "2015-06-01T14:38:36Z")

</div>

yes, go to configuration\>projects in the gateway web page and then click view on the project you want to see. it will show the link used to launch a staging client.