# Running Ignition Edge and Designer on Raspberry pi 4

**URL:** <https://forum.inductiveautomation.com/t/running-ignition-edge-and-designer-on-raspberry-pi-4/29258>\
**Category:** Ignition\
**Created:** [October 21, 2019, 6:19pm UTC](https://forum.inductiveautomation.com/t/running-ignition-edge-and-designer-on-raspberry-pi-4/29258 "2019-10-21T18:19:44Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![witman](https://avatars.discourse-cdn.com/v4/letter/w/d2c977/32.png) [@witman](https://forum.inductiveautomation.com/u/witman)\
**Post date:** [October 21, 2019, 8:05pm UTC](https://forum.inductiveautomation.com/t/running-ignition-edge-and-designer-on-raspberry-pi-4/29258/3 "2019-10-21T20:05:33Z")

</div>

See the lower end of this thread for what others have done to run Ignition 8 on 32-bit OS:

> [@Ignition 8 Client on Raspberry PI](http://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464/21):
>
> I would also be greatly interested in developments in this issue. We calculated a project with multiple sites with each site using a PI for minor display functionality. Since ARM is no longer supported we would have to buy perspective licences for multiple gateways. I think this is a rather big step all of a sudden…

---

_[View the full topic](https://forum.inductiveautomation.com/t/running-ignition-edge-and-designer-on-raspberry-pi-4/29258)._