# Running \*.jnlp file on Raspberry Pi 3 B+ **URL:** \ **Category:** General Discussion\ **Created:** [March 7, 2019, 2:57pm UTC](https://forum.inductiveautomation.com/t/running-jnlp-file-on-raspberry-pi-3-b/23123 "2019-03-07T14:57:36Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [March 7, 2019, 3:08pm UTC](https://forum.inductiveautomation.com/t/running-jnlp-file-on-raspberry-pi-3-b/23123/3 "2019-03-07T15:08:33Z")
Use the native client launcher. > [@Raspberry Pi 3 B+ Raspbian](http://forum.inductiveautomation.com/t/raspberry-pi-3-b-raspbian/22611): > > Hi Guys, I am trying to run an Ignition client on a Raspberry Pi 3 B+ running the Raspbian OS. If I navigate to the gateway home page and try launch a project it downloads the .jnlp file as normal but when i try to open that file (in the file explorer) it just re-downloads it. I have also tried downloading the native Client Launcher for Linux and extracted using the terminal using the ‘tar -xvf’ command. The extraction works fine but when I go into the new folder (through the file explorer) a… --- _[View the full topic](https://forum.inductiveautomation.com/t/running-jnlp-file-on-raspberry-pi-3-b/23123)._