# Runtime Performance Is Too Slow **URL:** \ **Category:** Ignition\ **Created:** [February 16, 2024, 6:01am UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807 "2024-02-16T06:01:07Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![parth\_thakkar](https://avatars.discourse-cdn.com/v4/letter/p/aca169/32.png) [@parth\_thakkar](https://forum.inductiveautomation.com/u/parth_thakkar)\ **Post date:** [February 16, 2024, 6:01am UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/1 "2024-02-16T06:01:07Z")
I have multiple screens with multiple equipment's have individual faceplates. and it started lagging and have very slow response. ![Screenshot 2024-02-16 112637](https://us1.discourse-cdn.com/inductiveautomation/original/3X/d/1/d16189b7c2579ea8fa3ec4b69d6c2a63ee348d81.png) . ---
**Author:** ![Hayden\_Watson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/hayden_watson/32/48792_2.png) [@Hayden\_Watson](https://forum.inductiveautomation.com/u/Hayden_Watson)\ **Post date:** [February 16, 2024, 7:13am UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/2 "2024-02-16T07:13:37Z")
What are the specs of your server, looks like only 3GB of RAM, not a huge amount if multiple devices and clients. > **[Ignition Server Sizing and Architecture Guide](https://inductiveautomation.com/resources/article/ignition-server-sizing-and-architecture-guide)** > > This guide is intended to provide some tips to help you determine the correct architecture depending on your requirements. It is important to note that any architecture that you come up with needs to be fully tested and verified. Throughout that... ---
**Author:** ![parth\_thakkar](https://avatars.discourse-cdn.com/v4/letter/p/aca169/32.png) [@parth\_thakkar](https://forum.inductiveautomation.com/u/parth_thakkar)\ **Post date:** [February 16, 2024, 8:51am UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/3 "2024-02-16T08:51:25Z")
Thank you for your response. I Try to increase the Ram Up to 8GB Still Facing the Same Issue ![Screenshot 2024-02-16 141501](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/2/f23bdbccaf795cde7d155c4108aa3b502ca08e32.png) ---
**Author:** ![bschroeder](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bschroeder/32/13260_2.png) [@bschroeder](https://forum.inductiveautomation.com/u/bschroeder)\ **Post date:** [February 16, 2024, 12:30pm UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/4 "2024-02-16T12:30:01Z")
Vision or perspective? If vision the problem is almost certainly not the gateway but inefficient scripting at the client level. Edit Can you also provide more information about your system as a whole? What PLC, what architecture etc? The memory isn't the issue. You are way lower than 8GB so there is something else going on. ---
**Author:** ![parth\_thakkar](https://avatars.discourse-cdn.com/v4/letter/p/aca169/32.png) [@parth\_thakkar](https://forum.inductiveautomation.com/u/parth_thakkar)\ **Post date:** [February 19, 2024, 4:43am UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/5 "2024-02-19T04:43:26Z")
I am using perspective Scada That too In Virtual Machine. Specifications Of VM: - 13th Gen Intel(R) Core (TM) i7-1365U 2.69GHZ (4 Processors) RAM: -12 GB System: - 64-Bit Using Rockwell PLC on Emulator and Getting Data Through RS Linx ---
**Author:** ![bschroeder](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bschroeder/32/13260_2.png) [@bschroeder](https://forum.inductiveautomation.com/u/bschroeder)\ **Post date:** [February 19, 2024, 1:01pm UTC](https://forum.inductiveautomation.com/t/runtime-performance-is-too-slow/85807/6 "2024-02-19T13:01:42Z")
What does your device connection status look like for the Emulator Connection? Can you provide a screen shot?