# RV-55 to Micrologix 1000 OPC Device Settings

**URL:** <https://forum.inductiveautomation.com/t/rv-55-to-micrologix-1000-opc-device-settings/84064>\
**Category:** Ignition\
**Created:** [January 10, 2024, 6:18pm UTC](https://forum.inductiveautomation.com/t/rv-55-to-micrologix-1000-opc-device-settings/84064 "2024-01-10T18:18:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Danny\_Rivas](https://avatars.discourse-cdn.com/v4/letter/d/41988e/32.png) [@Danny\_Rivas](https://forum.inductiveautomation.com/u/Danny_Rivas)\
**Post date:** [January 10, 2024, 6:18pm UTC](https://forum.inductiveautomation.com/t/rv-55-to-micrologix-1000-opc-device-settings/84064/1 "2024-01-10T18:18:38Z")

</div>

Hello all, I am trying to get an old ML1000 (serial) into my Ignition OPC via a RV-55 Cell modem. Any advice is greatly appreciated. Are there any tricks or suggestions you might have for me? TIA!

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [January 10, 2024, 6:24pm UTC](https://forum.inductiveautomation.com/t/rv-55-to-micrologix-1000-opc-device-settings/84064/2 "2024-01-10T18:24:22Z")

</div>

I don't think the MicroLogix 1000 is supported. You may need to use another OPC UA server like Kepware.