# Sample project on Flex repeater

**URL:** <https://forum.inductiveautomation.com/t/sample-project-on-flex-repeater/21989>\
**Category:** Ignition Early Access\
**Created:** [January 18, 2019, 10:18pm UTC](https://forum.inductiveautomation.com/t/sample-project-on-flex-repeater/21989 "2019-01-18T22:18:28Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![joe.friedrich](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/joe.friedrich/32/7505_2.png) [@joe.friedrich](https://forum.inductiveautomation.com/u/joe.friedrich)\
**Post date:** [February 8, 2019, 12:16pm UTC](https://forum.inductiveautomation.com/t/sample-project-on-flex-repeater/21989/3 "2019-02-08T12:16:34Z")

</div>

Paul's sample project might help:

> [@Swiping Cards in Perspective](http://forum.inductiveautomation.com/t/swiping-cards-in-perspective/21402/2):
>
> The important part (at least, re: swiping) is actually a carousel. I’ve attached an extremely basic example with two different pages in a carousel - each is actually the same view, but with a different number of ‘cards’ visible. The ‘Card’ view is just a coordinate container; then the ‘Page’ is a flex container with a flex repeater within it. On the ‘Landing’ view, the carousel is set to ignore the default view height and width, then then also set to take the entire space available in its contai…

---

_[View the full topic](https://forum.inductiveautomation.com/t/sample-project-on-flex-repeater/21989)._