# Save image(s) to local disk from Image Management doesn't always work

**URL:** <https://forum.inductiveautomation.com/t/save-image-s-to-local-disk-from-image-management-doesnt-always-work/88981>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [April 17, 2024, 3:18pm UTC](https://forum.inductiveautomation.com/t/save-image-s-to-local-disk-from-image-management-doesnt-always-work/88981 "2024-04-17T15:18:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christian\_de\_Bellefe](https://avatars.discourse-cdn.com/v4/letter/c/e9c0ed/32.png) [@Christian\_de\_Bellefe](https://forum.inductiveautomation.com/u/Christian_de_Bellefe)\
**Post date:** [April 17, 2024, 3:18pm UTC](https://forum.inductiveautomation.com/t/save-image-s-to-local-disk-from-image-management-doesnt-always-work/88981/1 "2024-04-17T15:18:38Z")

</div>

Hi,

I've got a case where i've exported my project from Server 1 to Server 2. Of course i had to export/save all the images from Image Management, which i did, but one of them doesn't save to disk. When i see it in Image Management on Server 1, i've got a "Broken Image", and it says 0x0 (2092k)

When i open the page using this image, i see the image properly.  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/3/f349c4aa68b1600f4c7f7b4036f37a9e03d304d8.png)

Is it because the image is too large? As far as i know the image should be about 780Kb, not 2Mb. i've generated it with InkScape.

I'm using Ignition 8.1.36

(Note: I took the image generated with Inkscape to import it on Server 2. I get [0x0] (779k))

Thank you