# SCADA Perspective security zones

**URL:** <https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062>\
**Category:** Ignition\
**Tags:** perspective, ignition83\
**Created:** [February 19, 2026, 11:57am UTC](https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062 "2026-02-19T11:57:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arr](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@Arr](https://forum.inductiveautomation.com/u/Arr)\
**Post date:** [February 19, 2026, 11:57am UTC](https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062/1 "2026-02-19T11:57:51Z")

</div>

Hi,

I want to show on panels different views in embedded view based on panels’ IP addresses. Is it possible to do it using security zones or something? E.g.: if IP is XXX.XXX.XXX.1 show view1 if IP is XXX.XXX.XXX.2 show view 2 in the embedded view.

Thank You

---

<div class="post-metadata">

**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\
**Post date:** [February 19, 2026, 1:00pm UTC](https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062/2 "2026-02-19T13:00:10Z")

</div>

Of course! You just need to bind the `props.path` view to be some value based on `session.props.host`.

While I recommend against naming Views such that you have 255 different Views to display based on IP, you could do so and use an expression binding:

`"MyViews/Embedded/IPLookup/View{session.props.host}”`

Or you could use a property binding with a transform of some type. The Map transform seems like a good candidate, as you could lump IP ranges into a Map and determine which to use based on the `host` prop.

---

<div class="post-metadata">

**Author:** ![Arr](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@Arr](https://forum.inductiveautomation.com/u/Arr)\
**Post date:** [February 19, 2026, 1:41pm UTC](https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062/3 "2026-02-19T13:41:16Z")

</div>

Thank You very much!

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [February 20, 2026, 7:59am UTC](https://forum.inductiveautomation.com/t/scada-perspective-security-zones/114062/4 "2026-02-20T07:59:27Z")

</div>

Note there are situations where the client ip address isn't available, such as when using a load balancer, behind a NAT, etc