# Scan Class Column

**URL:** <https://forum.inductiveautomation.com/t/scan-class-column/2849>\
**Category:** Ignition\
**Created:** [April 7, 2011, 7:49pm UTC](https://forum.inductiveautomation.com/t/scan-class-column/2849 "2011-04-07T19:49:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jboyer](https://avatars.discourse-cdn.com/v4/letter/j/49beb7/32.png) [@jboyer](https://forum.inductiveautomation.com/u/jboyer)\
**Post date:** [April 7, 2011, 7:49pm UTC](https://forum.inductiveautomation.com/t/scan-class-column/2849/1 "2011-04-07T19:49:58Z")

</div>

I think adding the ability to add a scan class column to the SQLtag browser in the designer would be very helpful in identifying potential update rate problems and such.

---

<div class="post-metadata">

**Author:** ![Colby.Clegg](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/colby.clegg/32/3282_2.png) [@Colby.Clegg](https://forum.inductiveautomation.com/u/Colby.Clegg)\
**Post date:** [April 8, 2011, 5:45pm UTC](https://forum.inductiveautomation.com/t/scan-class-column/2849/2 "2011-04-08T17:45:00Z")

</div>

No problem, I’ve added it for 7.2.6.

Regards,

---

<div class="post-metadata">

**Author:** ![jboyer](https://avatars.discourse-cdn.com/v4/letter/j/49beb7/32.png) [@jboyer](https://forum.inductiveautomation.com/u/jboyer)\
**Post date:** [April 8, 2011, 5:53pm UTC](https://forum.inductiveautomation.com/t/scan-class-column/2849/3 "2011-04-08T17:53:57Z")

</div>

Thank you!