# Schedule Entry finish time too long error

**URL:** <https://forum.inductiveautomation.com/t/schedule-entry-finish-time-too-long-error/2902>\
**Category:** 3rd Party Modules\
**Created:** [May 3, 2011, 9:54am UTC](https://forum.inductiveautomation.com/t/schedule-entry-finish-time-too-long-error/2902 "2011-05-03T09:54:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brett\_Yeomans](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Brett\_Yeomans](https://forum.inductiveautomation.com/u/Brett_Yeomans)\
**Post date:** [May 3, 2011, 9:54am UTC](https://forum.inductiveautomation.com/t/schedule-entry-finish-time-too-long-error/2902/1 "2011-05-03T09:54:28Z")

</div>

Having just downloaded the OEE module I am at the very beginning of trying to understand it but I seem to have found a problem. I have entered a Work order of 300 units and the line has a Default Production Rate of 50. When I go to the Schedule page and enter this job if I start the job 1:00am or later it gives a finish time of 6 hours 45 minutes (breaks I assume), OK. If I try to plan the job to start between 12:00am and 12:59am the finish time is 17 days ahead at 12:16PM. ☹

---

<div class="post-metadata">

**Author:** ![Brett\_Yeomans](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Brett\_Yeomans](https://forum.inductiveautomation.com/u/Brett_Yeomans)\
**Post date:** [May 3, 2011, 6:35pm UTC](https://forum.inductiveautomation.com/t/schedule-entry-finish-time-too-long-error/2902/2 "2011-05-03T18:35:47Z")

</div>

Downloaded and installed on seperate laptop and problem has gone away???