# Scikit-Image, OpenCV, PIL python libraries **URL:** \ **Category:** General Discussion\ **Tags:** vision\ **Created:** [September 29, 2022, 12:53pm UTC](https://forum.inductiveautomation.com/t/scikit-image-opencv-pil-python-libraries/64646 "2022-09-29T12:53:56Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [September 29, 2022, 1:59pm UTC](https://forum.inductiveautomation.com/t/scikit-image-opencv-pil-python-libraries/64646/7 "2022-09-29T13:59:05Z")
My Image Streamer module, in addition to **using** OpenCV to read RTSP camera streams, **loads** OpenCV's java bindings into Jython for scripting use. It isn't quite the same as using OpenCV's CPython bindings, but close. It will load into Vision and Designer scopes if the local install of OpenCV and FFmpeg are compatible. > [@Automation Professionals' Image Streamer Driver Module](https://forum.inductiveautomation.com/t/automation-professionals-image-streamer-driver-module/29371): > > Automation Professionals is pleased to announce a Release Candidate for its new driver module, supporting the live Network Image transmission format of [Keyence CV-5000](https://www.keyence.com/products/vision/vision-sys/cv-5000/index.jsp) machine vision controllers, plus support for common Network Video streams via [OpenCV](https://opencv.org/). Stream metadata is exposed as OPC items, and the output streams are Motion JPEG. The IP Camera Viewer Component in Vision can consume these streams, making it possible to integrate IP Cameras that don't have MJPEG support or have poor support f… Note: Installing OpenCV and FFmpeg as documented for my module also sets the stage for manually installing the jar without using my module. --- _[View the full topic](https://forum.inductiveautomation.com/t/scikit-image-opencv-pil-python-libraries/64646)._