# Script Troubleshooting

**URL:** <https://forum.inductiveautomation.com/t/script-troubleshooting/106266>\
**Category:** Ignition\
**Created:** [May 14, 2025, 5:36pm UTC](https://forum.inductiveautomation.com/t/script-troubleshooting/106266 "2025-05-14T17:36:48Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![bschroeder](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bschroeder/32/13260_2.png) [@bschroeder](https://forum.inductiveautomation.com/u/bschroeder)\
**Post date:** [May 14, 2025, 6:04pm UTC](https://forum.inductiveautomation.com/t/script-troubleshooting/106266/6 "2025-05-14T18:04:32Z")

</div>

This is perspective correct?

This: [OPC "Start Button" in Perspective - #2 by pturmel](https://forum.inductiveautomation.com/t/opc-start-button-in-perspective/70396/2) would be what I would recommend. Set via OPC, not tag, and then once the PLC receives the command reset in the PLC.

---

_[View the full topic](https://forum.inductiveautomation.com/t/script-troubleshooting/106266)._