# Seeking options for simple remote air temperature monitoring

**URL:** <https://forum.inductiveautomation.com/t/seeking-options-for-simple-remote-air-temperature-monitoring/68491>\
**Category:** General Discussion\
**Created:** [January 11, 2023, 4:03pm UTC](https://forum.inductiveautomation.com/t/seeking-options-for-simple-remote-air-temperature-monitoring/68491 "2023-01-11T16:03:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rusty](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rusty/32/19859_2.png) [@Rusty](https://forum.inductiveautomation.com/u/Rusty)\
**Post date:** [January 11, 2023, 4:03pm UTC](https://forum.inductiveautomation.com/t/seeking-options-for-simple-remote-air-temperature-monitoring/68491/1 "2023-01-11T16:03:24Z")

</div>

Hello Ignition community,

I am sure some of you have already solved a similar challenge- I am seeking an inexpensive solution for trending air temperature in a remote corner of the plant in a cold room where no other automation is really setup. Does anyone know of a temperature measurement system which could connect to Ignition without having to install a PLC or IO-Link? Something like an OPC room thermometer? I'm not seeking to control the temperature.

Any suggestions are welcome, thank you for your help.

Best regards,  
Rusty

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [January 11, 2023, 4:31pm UTC](https://forum.inductiveautomation.com/t/seeking-options-for-simple-remote-air-temperature-monitoring/68491/2 "2023-01-11T16:31:40Z")

</div>

[https://buy.advantech.com/I-O-Devices-Communication/Wireless-IoT-Sensors-Wireless-I-O-Modules/model-WISE-4220-S231A.htm](https://buy.advantech.com/I-O-Devices-Communication/Wireless-IoT-Sensors-Wireless-I-O-Modules/model-WISE-4220-S231A.htm)

---

<div class="post-metadata">

**Author:** ![Rusty](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rusty/32/19859_2.png) [@Rusty](https://forum.inductiveautomation.com/u/Rusty)\
**Post date:** [January 17, 2023, 7:11pm UTC](https://forum.inductiveautomation.com/t/seeking-options-for-simple-remote-air-temperature-monitoring/68491/3 "2023-01-17T19:11:09Z")

</div>

Does anyone have experience integrating the system JordanCClark mentioned or perhaps a different platform? I am also looking into this solution: [https://store.ncd.io/product/industrial-long-range-wireless-temperature-humidity-sensor/](https://store.ncd.io/product/industrial-long-range-wireless-temperature-humidity-sensor/)