# Selecting component deep select go up in view hierarchy

**URL:** <https://forum.inductiveautomation.com/t/selecting-component-deep-select-go-up-in-view-hierarchy/104992>\
**Category:** Ignition\
**Tags:** perspective, ignition81\
**Created:** [April 11, 2025, 11:32am UTC](https://forum.inductiveautomation.com/t/selecting-component-deep-select-go-up-in-view-hierarchy/104992 "2025-04-11T11:32:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael\_Johannsen](https://avatars.discourse-cdn.com/v4/letter/m/3ab097/32.png) [@Michael\_Johannsen](https://forum.inductiveautomation.com/u/Michael_Johannsen)\
**Post date:** [April 11, 2025, 11:32am UTC](https://forum.inductiveautomation.com/t/selecting-component-deep-select-go-up-in-view-hierarchy/104992/1 "2025-04-11T11:32:06Z")

</div>

Hi

When I want to select a component in a tab view the deep select go up in view hierarchy instead of selecting the component.

The problem started when a started pipes.  
When I copy the view there is no problem until I start to work with pipes again.  
If I close the designer and open again, there is no problem until I start to work with pipes again.

I'm using V8.1.47, and I didn't have this problem in V8.1.43

Does some one have a solution for this?

---

<div class="post-metadata">

**Author:** ![Michael\_Johannsen](https://avatars.discourse-cdn.com/v4/letter/m/3ab097/32.png) [@Michael\_Johannsen](https://forum.inductiveautomation.com/u/Michael_Johannsen)\
**Post date:** [April 25, 2025, 11:19am UTC](https://forum.inductiveautomation.com/t/selecting-component-deep-select-go-up-in-view-hierarchy/104992/3 "2025-04-25T11:19:41Z")

</div>

Support has confirmed that there is in bug in the system, and it will properly be solved in update.