# Send project from Agent to EAM Controller

**URL:** <https://forum.inductiveautomation.com/t/send-project-from-agent-to-eam-controller/106905>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [June 2, 2025, 4:41pm UTC](https://forum.inductiveautomation.com/t/send-project-from-agent-to-eam-controller/106905 "2025-06-02T16:41:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ron.routledge](https://avatars.discourse-cdn.com/v4/letter/r/b782af/32.png) [@ron.routledge](https://forum.inductiveautomation.com/u/ron.routledge)\
**Post date:** [June 2, 2025, 4:41pm UTC](https://forum.inductiveautomation.com/t/send-project-from-agent-to-eam-controller/106905/1 "2025-06-02T16:41:23Z")

</div>

Is it possible to send a Vision project from an Agent to the EAM controller? In the Send Project Agent task, there is checkbox "Include the controller as a target", but I haven't found any documentation on that option.

Thanks!

---

<div class="post-metadata">

**Author:** ![Clancy\_Cavanaugh](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@Clancy\_Cavanaugh](https://forum.inductiveautomation.com/u/Clancy_Cavanaugh)\
**Post date:** [June 2, 2025, 9:19pm UTC](https://forum.inductiveautomation.com/t/send-project-from-agent-to-eam-controller/106905/2 "2025-06-02T21:19:27Z")

</div>

If I'm understanding you correctly, I believe the answer is yes. Check the checkbox, then choose the agent as the source gateway, and choose the project.

If you are running the task from a script, then I believe the system.eam.runTask call has to be run on the controller.