# Send ZPL command to Zebra 170PAX4 via TCP/IP Socket

**URL:** <https://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003>\
**Category:** Ignition\
**Created:** [March 10, 2013, 3:03am UTC](https://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003 "2013-03-10T03:03:02Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![ryanjmclaughlin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryanjmclaughlin/32/4318_2.png) [@ryanjmclaughlin](https://forum.inductiveautomation.com/u/ryanjmclaughlin)\
**Post date:** [October 20, 2017, 12:30pm UTC](https://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003/14 "2017-10-20T12:30:28Z")

</div>

Thanks for the HTTP tip. I did not know this was possible this easily.

Here is an Ignition snippet for reference that prints ZPL to a printer

```auto
system.net.httpPost('http://192.168.1.10/pstprnt', postData="^XA^WD^XZ")

```

---

_[View the full topic](https://forum.inductiveautomation.com/t/send-zpl-command-to-zebra-170pax4-via-tcp-ip-socket/6003)._