# Sending Active Alarms to Viewmarq display

**URL:** <https://forum.inductiveautomation.com/t/sending-active-alarms-to-viewmarq-display/11051>\
**Category:** General Discussion\
**Created:** [January 15, 2016, 3:53pm UTC](https://forum.inductiveautomation.com/t/sending-active-alarms-to-viewmarq-display/11051 "2016-01-15T15:53:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pbrandt](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@pbrandt](https://forum.inductiveautomation.com/u/pbrandt)\
**Post date:** [January 15, 2016, 3:53pm UTC](https://forum.inductiveautomation.com/t/sending-active-alarms-to-viewmarq-display/11051/1 "2016-01-15T15:53:45Z")

</div>

We would like to set up our alarm system to display active alarms on our plant floor on several Viewmarq LED displays. What is the best way to do this? Most of our alarms are triggered from an Allen Bradley Control logix L74 processor.  
Thanks in advance.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [January 15, 2016, 10:19pm UTC](https://forum.inductiveautomation.com/t/sending-active-alarms-to-viewmarq-display/11051/2 "2016-01-15T22:19:26Z")

</div>

Don’t those support modbus/TCP? If so, you can map opc tags to the ViewMarq