# Sepasoft modules not found in perspective

**URL:** <https://forum.inductiveautomation.com/t/sepasoft-modules-not-found-in-perspective/115584>\
**Category:** 3rd Party Modules\
**Tags:** perspective, ignition83, sepasoft, vision\
**Created:** [May 18, 2026, 2:32pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-not-found-in-perspective/115584 "2026-05-18T14:32:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lyes.bendjillali](https://avatars.discourse-cdn.com/v4/letter/l/ecccb3/32.png) [@lyes.bendjillali](https://forum.inductiveautomation.com/u/lyes.bendjillali)\
**Post date:** [May 18, 2026, 2:32pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-not-found-in-perspective/115584/1 "2026-05-18T14:32:58Z")

</div>

I have installed the following Sepasoft modules : BATCH; MES; OEE and SPC.

Only SPC is usable in perspective; the rest give me a message "not found" for exemple "mes.production.batchselector not found"

I tried disabling the modules and re-enabling; uninstalling and reinstalling and restarting the Gateway multiple times.

When i tried in Vision i do not have this issue. Any ideas where the issue is ?

---

<div class="post-metadata">

**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\
**Post date:** [May 19, 2026, 8:00pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-not-found-in-perspective/115584/2 "2026-05-19T20:00:05Z")

</div>

You'll get a quicker response if you reach out to Sepasoft directly.

> **[Sepasoft MES Support | Help, Documentation & Contact Info](https://www.sepasoft.com/support/)**
>
> Find the help you need: open a support ticket, explore documentation, contact our team, or get answers about Sepasoft products, training, and MES certification.

---

<div class="post-metadata">

**Author:** ![amitkumar.kalyanpras](https://avatars.discourse-cdn.com/v4/letter/a/f07891/32.png) [@amitkumar.kalyanpras](https://forum.inductiveautomation.com/u/amitkumar.kalyanpras)\
**Post date:** [May 21, 2026, 5:46am UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-not-found-in-perspective/115584/3 "2026-05-21T05:46:36Z")

</div>

I guess you should also install production module at last.