# Sepasoft modules show fault status in ignition 8

**URL:** <https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366>\
**Category:** Ignition Early Access\
**Created:** [April 24, 2019, 6:00pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366 "2019-04-24T18:00:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nader.chinichian](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nader.chinichian/32/9261_2.png) [@nader.chinichian](https://forum.inductiveautomation.com/u/nader.chinichian)\
**Post date:** [April 24, 2019, 6:00pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366/1 "2019-04-24T18:00:21Z")

</div>

Hi  
I install ignition 8.0.0 stable release with Sepasoft modules and see the all of Sepasoft modules show faulted status.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 24, 2019, 7:24pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366/2 "2019-04-24T19:24:10Z")

</div>

I haven’t seen their modules released for v8 yet.

---

<div class="post-metadata">

**Author:** ![Paul.Scott](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul.scott/32/4578_2.png) [@Paul.Scott](https://forum.inductiveautomation.com/u/Paul.Scott)\
**Post date:** [April 24, 2019, 7:37pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366/3 "2019-04-24T19:37:11Z")

</div>

@pturmel is correct, some of Sepasoft’s modules may not yet be ready for 8.0.0.

It looks like they have some documentation on the matter: [https://help.sepasoft.com/docs/display/MHD/Ignition+8+Readiness](https://help.sepasoft.com/docs/display/MHD/Ignition+8+Readiness)

---

<div class="post-metadata">

**Author:** ![Steve\_Laubach](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/steve_laubach/32/60900_2.png) [@Steve\_Laubach](https://forum.inductiveautomation.com/u/Steve_Laubach)\
**Post date:** [April 26, 2019, 2:01pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366/4 "2019-04-26T14:01:27Z")

</div>

Does 8.0 compatibility on the Sepasoft modules translate to 8.01 compatibility?

I have a customer that has the Sepasoft modules and has AB PLCs for the most part. There is a semi-rare AB OPC timeout bug that gets fixed in 8.01. We’re planning to upgrade directly to 8.01 but I’m trying to determine if their Sepasoft modules will break at that time.

---

<div class="post-metadata">

**Author:** ![Paul.Scott](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul.scott/32/4578_2.png) [@Paul.Scott](https://forum.inductiveautomation.com/u/Paul.Scott)\
**Post date:** [April 26, 2019, 3:12pm UTC](https://forum.inductiveautomation.com/t/sepasoft-modules-show-fault-status-in-ignition-8/24366/5 "2019-04-26T15:12:37Z")

</div>

> [@Steve\_Laubach](#):
>
> Does 8.0 compatibility on the Sepasoft modules translate to 8.01 compatibility?

In theory it should. Although technically the folks at Sepasoft would better be able to answer that question.