# Session History/Log

**URL:** <https://forum.inductiveautomation.com/t/session-history-log/9743>\
**Category:** Ignition\
**Created:** [February 25, 2015, 12:22am UTC](https://forum.inductiveautomation.com/t/session-history-log/9743 "2015-02-25T00:22:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jlteel](https://avatars.discourse-cdn.com/v4/letter/j/c67d28/32.png) [@jlteel](https://forum.inductiveautomation.com/u/jlteel)\
**Post date:** [February 25, 2015, 12:22am UTC](https://forum.inductiveautomation.com/t/session-history-log/9743/1 "2015-02-25T00:22:55Z")

</div>

Is there a built-in way or has somebody come up with a way to log when users log in or out of an Ignition project? Ideally, I’d capture the user name and the IP address.

Thanks in advance for your help.

---

<div class="post-metadata">

**Author:** ![jlteel](https://avatars.discourse-cdn.com/v4/letter/j/c67d28/32.png) [@jlteel](https://forum.inductiveautomation.com/u/jlteel)\
**Post date:** [February 25, 2015, 12:28am UTC](https://forum.inductiveautomation.com/t/session-history-log/9743/2 "2015-02-25T00:28:39Z")

</div>

Never mind. This was ridiculously easy, as I thought it would be. Just missed the checkbox the first 50 times I looked at it.

---

<div class="post-metadata">

**Author:** ![dhananjay\_vichare](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dhananjay_vichare/32/74712_2.png) [@dhananjay\_vichare](https://forum.inductiveautomation.com/u/dhananjay_vichare)\
**Post date:** [March 23, 2015, 10:08am UTC](https://forum.inductiveautomation.com/t/session-history-log/9743/3 "2015-03-23T10:08:18Z")

</div>

Hi jlteel,

I want configure the session history, could you please explain it more?

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![jlteel](https://avatars.discourse-cdn.com/v4/letter/j/c67d28/32.png) [@jlteel](https://forum.inductiveautomation.com/u/jlteel)\
**Post date:** [March 23, 2015, 12:10pm UTC](https://forum.inductiveautomation.com/t/session-history-log/9743/4 "2015-03-23T12:10:13Z")

</div>

From the Designer, select “Properties” from the “Project” menu. Under the Project --\> General settings, look for the check box that says “Enable Auditing.” Check it if it isn’t. That’s all there is.

---

<div class="post-metadata">

**Author:** ![dhananjay\_vichare](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dhananjay_vichare/32/74712_2.png) [@dhananjay\_vichare](https://forum.inductiveautomation.com/u/dhananjay_vichare)\
**Post date:** [March 23, 2015, 12:15pm UTC](https://forum.inductiveautomation.com/t/session-history-log/9743/5 "2015-03-23T12:15:31Z")

</div>

Thanks jlteel,  
 ![:thumb_right:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/2026e28c0c425034352c1b75807edf956adc75f4.gif ":thumb\_right:")