# Set client auto-renewal time after master gateway failover time

**URL:** <https://forum.inductiveautomation.com/t/set-client-auto-renewal-time-after-master-gateway-failover-time/73235>\
**Category:** Ignition\
**Tags:** perspective, ignition81\
**Created:** [May 4, 2023, 4:25am UTC](https://forum.inductiveautomation.com/t/set-client-auto-renewal-time-after-master-gateway-failover-time/73235 "2023-05-04T04:25:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![KIM\_SUNG\_HOO](https://avatars.discourse-cdn.com/v4/letter/k/977dab/32.png) [@KIM\_SUNG\_HOO](https://forum.inductiveautomation.com/u/KIM_SUNG_HOO)\
**Post date:** [May 4, 2023, 4:25am UTC](https://forum.inductiveautomation.com/t/set-client-auto-renewal-time-after-master-gateway-failover-time/73235/1 "2023-05-04T04:25:23Z")

</div>

hi.

I'm doing a redundancy test. A problem occurred while forcibly failing over the master gateway.

There is no problem with master-\>redundancy progress, but it takes about 2 minutes and 30 seconds to recognize [lost master gateway].

Any way to set this time? (This is the time before [failover timeout])

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [May 4, 2023, 12:11pm UTC](https://forum.inductiveautomation.com/t/set-client-auto-renewal-time-after-master-gateway-failover-time/73235/2 "2023-05-04T12:11:50Z")

</div>

There is a setting in the gateway redundancy config for failover detection. Check that.

---

<div class="post-metadata">

**Author:** ![jiyoung\_hwang1](https://avatars.discourse-cdn.com/v4/letter/j/bc79bd/32.png) [@jiyoung\_hwang1](https://forum.inductiveautomation.com/u/jiyoung_hwang1)\
**Post date:** [May 9, 2023, 1:32am UTC](https://forum.inductiveautomation.com/t/set-client-auto-renewal-time-after-master-gateway-failover-time/73235/3 "2023-05-09T01:32:44Z")

</div>

> [@pturmel](#):
>
> for failover detection

 ![1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/4/74ae678bd84eb6679eb848b188ec58d37d04ab83.gif)

The settings you mentioned  
"Failover Timeout" are you referring to that?