# Setting Up Identity Provider Roles

**URL:** <https://forum.inductiveautomation.com/t/setting-up-identity-provider-roles/55131>\
**Category:** Ignition\
**Created:** [January 18, 2022, 6:48pm UTC](https://forum.inductiveautomation.com/t/setting-up-identity-provider-roles/55131 "2022-01-18T18:48:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mitchell\_Lagenour](https://avatars.discourse-cdn.com/v4/letter/m/b19c9b/32.png) [@Mitchell\_Lagenour](https://forum.inductiveautomation.com/u/Mitchell_Lagenour)\
**Post date:** [January 18, 2022, 6:48pm UTC](https://forum.inductiveautomation.com/t/setting-up-identity-provider-roles/55131/1 "2022-01-18T18:48:04Z")

</div>

With our system, we are using an Active Directory for our Roles and Users.

So I set up the Active Directory in the Users, Roles section and I am able to pull in the Users and Roles.

However, when I look at the “manage users” and look at the list of users, it brings in the roles of the users as shown below:

 ![pic1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/7/1739e5a4031945624a2199367bd42e74dd887912.png)

Which this looks odd and doesn’t look “right”. The roles that this user is supposed to have is “Admin”, “Arcola”, “Tuscola”, and “West Prairie”. I see them in the text with the text “CN=” behind it.

So I test it and it says I don’t have access to the screens with the corresponding roles which means there is obviously something wrong.

I have no knowledge on Active Directories so any help on this would be appreciated. Is there a setting I forgot to add while setting up the Active Directory in Ignition?