# SFC - Dynamic Jump Step

**URL:** <https://forum.inductiveautomation.com/t/sfc-dynamic-jump-step/12120>\
**Category:** Ignition\
**Created:** [September 12, 2016, 5:56pm UTC](https://forum.inductiveautomation.com/t/sfc-dynamic-jump-step/12120 "2016-09-12T17:56:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mpeasley](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@mpeasley](https://forum.inductiveautomation.com/u/mpeasley)\
**Post date:** [September 12, 2016, 5:56pm UTC](https://forum.inductiveautomation.com/t/sfc-dynamic-jump-step/12120/1 "2016-09-12T17:56:02Z")

</div>

All,

I was wondering if there is a way in the SFC to set a step number to jump to? For example, In a workflow the end user may be on step 200 but I would want them to repeat the last 5 steps because they have messed something up, so I’d like to at will set them back to 195.

Am I missing something, or can the SFCs not do this?

Mike

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [September 12, 2016, 9:08pm UTC](https://forum.inductiveautomation.com/t/sfc-dynamic-jump-step/12120/2 "2016-09-12T21:08:22Z")

</div>

Hi Mike,

You can use multiple transitions to do this:

---

<div class="post-metadata">

**Author:** ![mpeasley](https://avatars.discourse-cdn.com/v4/letter/m/3bc359/32.png) [@mpeasley](https://forum.inductiveautomation.com/u/mpeasley)\
**Post date:** [September 13, 2016, 11:42am UTC](https://forum.inductiveautomation.com/t/sfc-dynamic-jump-step/12120/3 "2016-09-13T11:42:35Z")

</div>

I had seen that in the videos but it doesnt really achieve what i need.

I would essentially have to loop that back in front of every action block and transition based on what step number I wanted to force it to go to.

Unfortunately, for the size and dynamic element (meaning sequence 200 could have between 1 and 99 steps depending on the workflow), I was hoping for something more along the lines of PLC jumping where you could put in a step number and it would reset back to that step.