# Show projects in different displays

**URL:** <https://forum.inductiveautomation.com/t/show-projects-in-different-displays/18627>\
**Category:** Ignition\
**Created:** [June 26, 2018, 4:35pm UTC](https://forum.inductiveautomation.com/t/show-projects-in-different-displays/18627 "2018-06-26T16:35:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rigoberto.reyes](https://avatars.discourse-cdn.com/v4/letter/r/65b543/32.png) [@rigoberto.reyes](https://forum.inductiveautomation.com/u/rigoberto.reyes)\
**Post date:** [June 26, 2018, 4:35pm UTC](https://forum.inductiveautomation.com/t/show-projects-in-different-displays/18627/1 "2018-06-26T16:35:41Z")

</div>

Hi there.

I have 2 projects that must run in one thinclient with 2 displays (each project per display), however boths projects are shown in one of them. We are using open thinclient software to run the Ingnition´s projects.

In Ignition´s properties/launching tab, the values for screen index are 0 an 1, default launch mode is “full screen”.

To launch the projects in the Open ThinClient sw. we use the jnlp files.

Can you help me to find the soluction?

Thanks.